> For the complete documentation index, see [llms.txt](https://community.threekit.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://community.threekit.com/platform-documentation/catalog-2.0-docs/project-data/operators/polymesh-operators/bend-deformer.md).

# Bend Deformer

## Bend Deformer <a href="#h_01feebcj7e1sfnt1hzhwfhfzxh" id="h_01feebcj7e1sfnt1hzhwfhfzxh"></a>

Bend Deformer

A PolyMesh operator that will bend your model based on a pivot location and a specified angle. If testing on a Box you will need to make sure your mesh has enough segments or edgeloops to see the results.

<table data-header-hidden><thead><tr><th width="182"></th><th></th></tr></thead><tbody><tr><td><strong>PROPERTY</strong></td><td><strong>DESCRIPTION</strong></td></tr><tr><td><strong>Default Axis</strong></td><td>This is a drop down menu which allows the user to control which direction the bend is coming from. You are given the options of bending in X, Y or Z. By stacking operators, a user can also bend their model in the other directions as well.</td></tr><tr><td><strong>Angle</strong></td><td>A slider that can go from 0 to 360 in either a positive or negative direction. This number controls the amount the geometry is bending.</td></tr><tr><td><strong>Bend Rotation</strong></td><td>Change the default Axis further by adding values in the X,Y,Z directions</td></tr><tr><td><strong>Bend Pivot</strong></td><td>This controls where the bend is occurring by translating the pivot based on user X,Y,Z inputs</td></tr><tr><td><strong>Fixed Ends</strong></td><td>Fixed ends is calculating the center of the top and bottom of your model, and as the angle is manipulated, the centers of the two ends stay in roughly the same spot. Effectively, it is moving the pivot point in a line, so at 180 degrees it is a line, and you get quite a bit more control that way {the whole time ANGLE is the field being interacted with to demonstrate the variation).</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://community.threekit.com/platform-documentation/catalog-2.0-docs/project-data/operators/polymesh-operators/bend-deformer.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
